You should spend about 20 minutes on this task.
The diagram illustrates the process that is used to manufacture bricks for the building industry.
Summarize the information by selecting and reporting the main features and make comparisons where relevant.
Write at least 150 words.
The diagram shows the Brick Manufacturing Process. In addition, there are seven steps in the process.
ReplyDeleteAt first, the clay used to make the bricks is dug up from the ground by a high digger.
The second step is provided by place onto a metal gird, which is used to break up the clay into a small pieces..
Therefore, water and sand are added and the future bricks are placed into a mould. Nevertheless, there is a second way to create a brick. The brick is cut thanks to machine. Then, these bricks are fixed in an oven to dry for 24-48 hours.
In the following step, the bricks go through a kiln and cooling chamber process. They are heated in a kiln and then a high temperature 200C-980C. The last step includes a cooling chamber, where the bricks are stayed for 48-72 hours.
Finally, the bricks are packed and send to their consumers.
By Alexandra.
Well-done! The essay meets the criteria, has a well-developed structure and the ideas are fully explained. Pay attention to plural nouns and past participle of the verbs in Passive Voice.
DeleteThe diagram shows the Brick Manufacturing Process. In addition, there are seven phases in the process.
At first, the clay used to make the bricks is dug up from the ground by a high digger. The second step is provided by placing onto a metal grid, which is used to break up the clay into small pieces. Therefore, water and sand are added and the future bricks are put into moulds. Nevertheless, there is a second way to create bricks. They are cut with a wire machine. Then, these bricks are fixed in an oven to dry for 24-48 hours.
On the following level, the bricks go through a kiln and cooling chamber process. They are heated in the kiln at the temperature 200C-980C, then at a higher temperature from 870C to 1300C. The last stage includes a cooling chamber, where the bricks are left for 48-72 hours.
Finally, the bricks are packed and sent to their consumers.